This product features high reliability, low requirement for maintenance and simplicity of the few required connections and interfaces to ensure safe ignition of different gaseous, liquid and solid fuels.
The Plasma Ignition System is usable for ignition of difficult to be ignited fuels like pulverized solid fuels (pre-dried lignite (PDL), hard coal and biomass) as well as gases, oils and special fuels. Additionally the ignition in low-oxygen or oxygen-free atmospheres is possible.
The Plasma Ignition System is usable for ignition of difficult to be ignited fuels like pulverized solid fuels (pre-dried lignite (PDL), hard coal and biomass) as well as gases, oils and special fuels. Additionally the igntion in low-oxygen or oxygen-free atmospheres is possible.
The firing systems can be found in the following areas:
| 1 kW | 3 kW |
| Plasma Jet length (typical) | 100 mm | 150 mm |
| Plasma temperature | approx. 3500 °C | approx. 3500 °C |
| Lance diameter | 28 mm | 35 mm |
| Protection class | IP 65 | IP 65 |
| Ambient temperature lance head | 0 °C … 60 °C | 0 °C … 60 °C |
| Operational temperature plasma lance (continuously) | 180 °C | 180 °C |
| Operational temperature tip of lance (max. 2 min. without additional air or water cooling) | max. 1100 °C | max. 1100 °C |
| Material | Stainless steel | Stainless steel |
| Length of lance | max. 3 m | max. 5 m |
| Power supply | 230 VAC | 400 VAC |
| Carrier medium | e.g. compressed air | e.g. compressed air |
| Wattage | 1 kW, 3 kW |
|---|
