An oil fired igniter that showcases a compact design with integrated ignition module and ionization flame monitor/burner control with a built-in and convenient flame rod. This product also guarantees electromagnetic compatibility and also does not require on-site high-voltage cabling. Rugged and low maintenance in design, this product is able to accept extra light fuel in propane, butane, natural gas, or diesel forms. This product is also available for marine diesel operation.
Oil Fired Igniters
Description
- Compact design with integrated ignition module and ionisation flame monitor/burner control
- Built-in flame rod, ideally located
- No high-voltage cable required on site
- Guaranteed electromagnetic compatibility
- Rugged, low-maintenance design
- Sizes ranging from 300 kW to 3.6 MW (1,000,000 BTU/hr to 12,000,000 BTU/hr)
- Custom outer tube lengths available in 10-mm increments
- For extra light fuel oil (diesel), dual fuel igniters can also handle either propane/butane or natural gas
- Extremely tight and long pilot flame – no automatic retraction system typically required
- Class 1, 2 or 3 oil fired igniters according to NFPA also available
- Smoke free flame
- Also available for marine diesel operation
Applications
- Ignition of large coal or heavy fuel oil fired burners in utility boilers
Technical Data
| General data | |
| Oil volume | max. 40 kg/h or max. 60 kg/h or max. 80 kg/h |
| Outer tube diameter | 90 mm |
| Flame length (depending on oil nozzle size) | max. 2200 mm |
| Outer tube length L | 360 – 5000 mm |
| Oil port | Rp 3/8, top or bottom |
| Oil pressure | max. 4 barg |
| Atomising air port | Rp 1/4 |
| Atomising air | max. 4 barg |
| Air port | Rp 2, rotatable 4 x 90° |
| Air pressure | ≥ 10 mbarg, depending on the outer tube length |
| Features | with integrated ignition module and ionisation flame monitor for intermittent operation |
| Power head | |
| Ignition | 2 x 7.5 kV, ignition electrode against ignition electrode |
| Ambient temperature | -30 °C to +60 °C |
| Protection rating | IP 54 or IP 65 |
| Model | ZAEL2… |
| 1000 kW Ex-zone 1 / 21 | |
| General data | |
| Outer tube length | 360 – 5000 mm |
| Oil port | Rp 3/8 |
| Oil pressure | max. 4 barg |
| Atomising air port | Rp 1/4 |
| Atomising air | max. 4 barg |
| Features | with integrated ignition module and ionisation flame monitor for intermittent operation |
| Power head | |
| for zone 1: II 2G Ex d e IIB T4 Gb or II 2 G Ex d e IIC T4 Gb | |
| for zone 21: II 2 D Ex tb IIIC T 130 °C Db | |
| Ignition | 2 x 7.5 kV, ignition electrode against ignition electrode |
| Ambient temperature | -20 °C to +60 °C |
| Protection rating | IP 66 |
| Models | |
| Heat release 1000 kW | ZAVEX/EL2… |
| 1000 kW Ex-zone 2 / 22 | |
| General data | |
| Outer tube length | 360 – 5000 mm |
| Oil port | Rp 3/8, top or bottom |
| Oil pressure | max. 4 barg |
| Atomising air port | – |
| Atomising air | max. 4 barg |
| Features | with integrated ignition module and ionisation flame monitor for intermittent operation |
| Power head | |
| for zone 2: II 3G Ex nC IIC T5 Gc | |
| for zone 22: II 3D Ex tc IIIC T 100 °C | |
| Ignition | 2 x 7.5 kV, ignition electrode against ignition electrode |
| Ambient temperature | -20 °C to +60 °C |
| Protection rating | IP 66 |
| Models | |
| Heat release 1000 kW | ZXAEL2… |
Downloads
Additional information
| Kilowattage | 1000 kW, 2800 kW, 300 kW, 3600 kW |
|---|
