Mustang Sampling

Mustang® P53® Sample Conditioning System

The Mustang P53® Sample Conditioning System is an integral component to provide an Analytically Accurate® solution for natural gas sampling applications.

The P53® Sample Conditioning System solves the problem of hydrocarbon liquid condensation from Joule-Thomson cooling in natural gas analysis systems. High pressure natural gas samples are transported at a temperature well above the expected hydrocarbon dew point, which is maintained throughout the pressure reduction process, delivering a representative sample to the analyzers.

Description

The Mustang P53® Sample Conditioning System is an integral component to provide an Analytically Accurate® solution for natural gas sampling applications.

The P53® Sample Conditioning System solves the problem of hydrocarbon liquid condensation from Joule-Thomson cooling in natural gas analysis systems. High pressure natural gas samples are transported at a temperature well above the expected hydrocarbon dew point, which is maintained throughout the pressure reduction process, delivering a representative sample to the analyzers.

The Mustang P53 is available with either the Mustang® Heated Regulator or Mustang® Joule-Thomson Heated Regulator, used in combination with a heated liquid block and is designed for use with integrally controlled, remote Mustang Pony® enclosure products.

Features

  • Patented technology utilizing existing power supplied by electric heat trace tube bundle
  • Remote or Direct Mount
  • Rated for Class 1, Division 1, Groups C, D, & T3 locations
  • Multiple streams in and out
  • Digital Controller
  • Steel latching closures
  • Glass Fiber Reinforced Polyester (GRP) or Stainless Steel (SS) Enclosure
  • NEMA 4X Enclosure
  • Low Pressure Pump System (available for systems such as flares, ducts and vapor recovery)

Benefits

  • Requires no external power or natural gas for proper operation
  • Conforms to the API Manual of Petroleum Measurement Standards chapter 14.1

Certifications

  • cETLus Certified

Specifications

Wetted Parts 316 SS
Cabinet Sample Volume 0.51 cu. in.
Maintains Sample Gas Standard set point at 120ºF (49ºC)
Adjustable from 60ºF to 284ºF (16ºC to 140ºC)
Regulator Options MHR™ Single-Stage Regulator
MJTHR™ Multi-Stage Regulator
Input Supply Voltage Options 120 VAC, 200 Watts, 50/60 Hz, ± 10%
240 VAC, 200 Watts, 50/60 Hz, ± 10%
24 VDC
Maximum Allowable Operating Pressure 2000 psig @ 60ºF (138 BAR at 16ºC)
(Standard Design – Liquid membrane separator
upstream of MHR Single Stage Regulator)
3750 psig @ 60ºF (259 BAR at 16ºC)
(Liquid membrane separator
downstream of MHR Single-Stage Regulator)
6000 psig @ 60ºF (414 BAR at 16ºC)
(Liquid membrane separator
downstream of MJTHR Multi-Stage Regulator)
PID Temperature Controller Options OI Oven Industries Controller
W Watlow® Controller
Cabinet Construction Options GRP Glass Fiber Reinforced Polyester
SS Stainless Steel
Optional Diaphragm Pump (for low pressure systems) 250ºF Teflon® Seals
400ºF Teflon®/EPDM Seals

Literature

Go to Top