Call us : 1.866.416.0516

Call us : 1.866.416.0516

GESTRA

GESTRA2021-07-14T21:54:03+00:00
GESTRA Logo

Heat and process fluid control

GESTRA is a global leader in the design and production of valves and control systems for heat and process fluid control. The products include steam traps, swing checks, boiler safety desuperheaters and specialty applications. The products are used wherever steam is generated, distributed, or used.

Contact a Product Specialist

Products

  • AccuChrome is designed for critical monitoring in the harshest environments. Whether you’re performing Btu and constituent analysis of natural gas for custody transfer, process optimization during natural gas fractionation, or 40 CFR 60 Subpart JA flare-gas emissions monitoring for regulatory compliance – you need precise, real-time measurements you can count on.
  • AccuLase-GPA™ is the only tunable diode laser (TDL) analyzer that measures H2S, CO2, and H2O using 1 Herriot Cell. AccuLase-GPA™ uses a proprietary measurement cell that detects H2S down to 0.15 ppm, rivaling the capabilities of lead-acetate tape technology. AccuLase-GPA™ is specific to H2S without methane, CO2, or benzene interferences. Since AccuLase-GPA™ does not require a scrubber system, the response time is rapid. AccuLase-GPA™ can measure up to 4 streams.
  • With a low pressure drip and excellent sealing, dual-plate check valves prevent the risk of backflow in liquid and gas lines.
  • The Brimstone is a unique tail & pit gas analyzer that monitors H2S, SO2, CS2 and COS and is capable of direct coupling to the process. Direct coupling provides the Brimstone with the ability to control sulfur vapor removal more efficiently. Galvanic’s proprietary probe design eliminates plugging problems associated with heated transfer lines. In addition, the Brimstone uses Chemometrics to measure all four key components; H2S, SO2, CS2 and COS simultaneously. This is a superior method because it measures absorption at 256 points versus the standard single point analysis. As the only tail & pit gas analyzer with these combined capabilities and features, the Brimstone is a truly exceptional and innovative product that provides unique process analysis in sulfur-recovery.
  • Efficient utilization of hot water and thermal oil heating systems with GESTRA's self-acting mechanical control valve BW (KALORIMAT) to ensure that your heating systems run efficiently and stably.
  • The swing-plate check valve is a cost-effective way to prevent backflow in your pipelines and other industrial applications for use with a wide range of fluids such as gases, liquids and steams.
  • Turner Designs Hydrocarbon Instruments, in partnership with Benchmark International, is proud to present the CF-200 Algae Monitor. Using the C-Fluor fluorescence probe, the online monitor is fully integrated and ready to detect Chlorophyll A in fresh or sea water.
  • The Sentry Cobra C manual gas sampler collects representative samples from gas and liquid short-chain hydrocarbon applications. This emission-free sampler uses a multi-ported valve. This valve simplifies the process of taking a sample. Additionally, it keeps the sample's integrity and handles environmental risks.
  • The Sentry Cobra DT closed loop sampler is designed to perform a detector tube measurement as safely, quickly and efficiently as possible. The Cobra DT sampler is designed with safety in mind, with a high-pressure regulator providing operators with a means to lower pressure to a safe level before inserting the detector tube. The 1000 cc cylinder allows a large volume of gas to be chambered so the operator can draw a fresh sample through the detector tube allowing a representative measurement to be collected.
  • The Sentry Cobra SS manual liquid sampler allows for safe and straightforward petroleum and natural gas sampling. The sampler design ensures a representative sample through direct connections to your lines. This Sentry low-emission sampler stands up to water corrosion and meets the highest quality and reliability standards required of petroleum sampling equipment.
  • Save energy and control your cooling-water return temperature with GESTRA's self-acting mechanical control valve CW (GESTRAMAT). GESTRA's CW cooling-water control valves (GESTRAMAT) help you to save energy by reducing the cooling-water flow to a minimum, and keeping the discharge temperature to the maximum permissible value. These control valves are self-acting and sense the discharge temperature by the integral regulator, so you can reduce operating costs.
  • Suitability-tested and certified impact pressure system to measure velocity and volume flow of dry flue gas or process gas in pipes or ducts.
  • AccuChrome is designed for critical monitoring in the harshest environments. Whether you’re performing Btu and constituent analysis of natural gas for custody transfer, process optimization during natural gas fractionation, or 40 CFR 60 Subpart JA flare-gas emissions monitoring for regulatory compliance – you need precise, real-time measurements you can count on.
  • AccuLase-GPA™ is the only tunable diode laser (TDL) analyzer that measures H2S, CO2, and H2O using 1 Herriot Cell. AccuLase-GPA™ uses a proprietary measurement cell that detects H2S down to 0.15 ppm, rivaling the capabilities of lead-acetate tape technology. AccuLase-GPA™ is specific to H2S without methane, CO2, or benzene interferences. Since AccuLase-GPA™ does not require a scrubber system, the response time is rapid. AccuLase-GPA™ can measure up to 4 streams.
  • With a low pressure drip and excellent sealing, dual-plate check valves prevent the risk of backflow in liquid and gas lines.
  • The Brimstone is a unique tail & pit gas analyzer that monitors H2S, SO2, CS2 and COS and is capable of direct coupling to the process. Direct coupling provides the Brimstone with the ability to control sulfur vapor removal more efficiently. Galvanic’s proprietary probe design eliminates plugging problems associated with heated transfer lines. In addition, the Brimstone uses Chemometrics to measure all four key components; H2S, SO2, CS2 and COS simultaneously. This is a superior method because it measures absorption at 256 points versus the standard single point analysis. As the only tail & pit gas analyzer with these combined capabilities and features, the Brimstone is a truly exceptional and innovative product that provides unique process analysis in sulfur-recovery.
  • Efficient utilization of hot water and thermal oil heating systems with GESTRA's self-acting mechanical control valve BW (KALORIMAT) to ensure that your heating systems run efficiently and stably.
  • The swing-plate check valve is a cost-effective way to prevent backflow in your pipelines and other industrial applications for use with a wide range of fluids such as gases, liquids and steams.
  • Turner Designs Hydrocarbon Instruments, in partnership with Benchmark International, is proud to present the CF-200 Algae Monitor. Using the C-Fluor fluorescence probe, the online monitor is fully integrated and ready to detect Chlorophyll A in fresh or sea water.
  • The Sentry Cobra C manual gas sampler collects representative samples from gas and liquid short-chain hydrocarbon applications. This emission-free sampler uses a multi-ported valve. This valve simplifies the process of taking a sample. Additionally, it keeps the sample's integrity and handles environmental risks.
  • The Sentry Cobra DT closed loop sampler is designed to perform a detector tube measurement as safely, quickly and efficiently as possible. The Cobra DT sampler is designed with safety in mind, with a high-pressure regulator providing operators with a means to lower pressure to a safe level before inserting the detector tube. The 1000 cc cylinder allows a large volume of gas to be chambered so the operator can draw a fresh sample through the detector tube allowing a representative measurement to be collected.
  • The Sentry Cobra SS manual liquid sampler allows for safe and straightforward petroleum and natural gas sampling. The sampler design ensures a representative sample through direct connections to your lines. This Sentry low-emission sampler stands up to water corrosion and meets the highest quality and reliability standards required of petroleum sampling equipment.
  • Save energy and control your cooling-water return temperature with GESTRA's self-acting mechanical control valve CW (GESTRAMAT). GESTRA's CW cooling-water control valves (GESTRAMAT) help you to save energy by reducing the cooling-water flow to a minimum, and keeping the discharge temperature to the maximum permissible value. These control valves are self-acting and sense the discharge temperature by the integral regulator, so you can reduce operating costs.
  • Suitability-tested and certified impact pressure system to measure velocity and volume flow of dry flue gas or process gas in pipes or ducts.
Get Product Pricing
Learn More from A Product Specialist

Go to Top