Ignition lance with high voltage cable, guided in a metal hose, for hazardous areas according NEC 500. This design boasts flexible customization for specific installation conditions as well as easily replaceable ignition tips which are specialized for ignition of HFO or at high pressure.
Ignition Lances
Description
Ignition lance with high voltage cable, guided in a metal hose, for hazardous areas according NEC 500.
Overview
- Flexible customization for specific installation conditions
- Ignition lance / high voltage cable connection through Conduit Outlet Body
- High voltage cable protected by metal hose
- Ignition lance lengths up to 15 meter
- High voltage cable length up to 50 meter – without any loss of performance
- Easily replaceable ignition tips
- Special ignition tips for ignition of HFO or at high pressure
- Ignition tip temperature-proof up to 600°C, briefly 800°C
- High temperature version temperature-proof up to 1000°C
- Compatible with retraction units D-VE 500
Applications
- Power stations
- Chemical industry
- Refineries
- Cement plants
- Waste incinerators
- Steam generators
- Heating plants
- Claus plants
Technical Data
| D-ZL 430Ex | |
|---|---|
| Max temperature ignition tip | Normal temperature (NT): up to 600°C, briefly 800°C High temperature (HT): up to 1000°C |
| Operational life time of ignition tip | 1 Mil. sparks |
| Length ignition lance LZL | Min 0,7 m, max 15 m (grid dimension 100 mm) |
| Diameter ignition lance | Standard: 22 mm Other on request |
| Length high voltage cable LHV | Min 3 m, max 50 m (grid dimension 5 m) |
| Cable take-off | At side of lance: 90° |
| Weight ignition lance | 1,6 kg/m at Ø22 mm |
| Weight high voltage cable | 2 kg + 0.5 kg/m |
| Ex protection (NEC 500) | Class I, Div. 1, Group A, B, C, D |
| Perm. ambient temperature | -50°C to +40°C (-58°F to 104°F) |
Downloads
Additional information
| Models | D-ZL 430Ex, D-ZL 431Ex, D-ZL 441Ex, D-ZL 500 |
|---|---|
| Lance Diameters | 15 mm, 17.2 mm, 26.7 mm |
