The Sentry TRW sample cooler cools a sample from a process stream. It may seem simple, but it is a uniquely designed small tube in a shell heat exchanger. The sample to be cooled flows through the tube side of the cooler, and the cooling fluid, usually water, flows through the shell side. The cooled sample then is taken to a laboratory for analysis or piped to in-line process instrumentation for continuous monitoring of properties such as conductivity, pH or other chemical constituents
TRW Sample Cooler
Description
Description
The Sentry TRW sample cooler cools a sample from a process stream. It may seem simple, but it is a uniquely designed small tube in a shell heat exchanger. The sample to be cooled flows through the tube side of the cooler, and the cooling fluid, usually water, flows through the shell side. The cooled sample then is taken to a laboratory for analysis or piped to in-line process instrumentation for continuous monitoring of properties such as conductivity, pH or other chemical constituents
The Sentry TRW sample cooler is compact and provides the industrial boiler user with a cost-effective and efficient sampling alternative. Its small profile allows for easy installation on or near the boiler. It offers optimal service for flows below 1200 cc per minute for single phase heat transfer. Standard tube side material is 300 series stainless steel.
Other other coolers available for flor rates from below 1200 cc to 5000 cc per minute.
Features
- Helical coil design
- Ideal for cooling low-pressure boiler water
| Standards | Sentry |
|---|---|
| Tube Diameter | 1/4 in OD |
| Shell Material | 304 SS |
| Tube Material | 316/316L SS |
| Shell Pressure | 250 psig at 450°F (17 barg at 232°C) |
| Tube Pressure | 2000 psig at 850°F (138 barg at 454°C) |
| Process Connections | 1/4 in OD Tube |
| Cooling Water Connections | 3/8 in FNPT |
| Heat Transfer Area | 1.2 ft² (0.11 m²) |
