A gas fired igniter boasting compact design with an integrated spark transformer and ionization flame monitor/burner control, a convenient and built in flame rod, guaranteed electromagnetic compatibility, and a rugged low maintenance design that does not require an on-site high voltage cable. Igniters are made in sizes ranging from 2 kW to 10 MW (7000 BTU/hr to 35000000 BTU/hr), and fuel types are tailored to customer preference and analysis.
Forced Draft Gas Fired Igniters
Description
Description
- Compact design with integrated spark transformer and ionisation flame monitor/burner control
- Built-in flame rod, ideally located
- No high-voltage cable required on site
- Guaranteed electromagnetic compatibility
- Rugged, low-maintenance design
- Sizes ranging from 2 kW to 10 MW (7,000 BTU/hr to 35,000,000 BTU/hr)
- Custom outer tube lengths available in 10-mm increments
- Fuel types include natural gas, conditioned coke oven gas, propane/butane or process gas, according to customer preference and analysis
- Extremely tight and long pilot flame – no automatic retraction system typically required
- Class 1, 2 or 3 gas fired igniters according to NFPA also available
- Also available with flexible outer tube for tilting burners
Applications
- Igniter and pilot burner for lean gas burners, heavy fuel oil burners or warm-up burners
Technical Data
| 2000 kW | |
| Common data | |
| Outer tube diameter | 160 mm |
| Flame length (depending on the gas) | max. 2000 mm |
| Outer tube length L | 300 – 4000 mm |
| Gas port | Rp 2, top or bottom |
| Gas pressure inlet | 50 – 150 mbarg |
| Air port | DN 100 / PN 6, rotatable 4 x 90° |
| Air pressure operating | min. 5 mbarg, depending on the outer tube length |
| Power head (not ZG4) | |
| Ignition | 2 x 5 kV, ignition electrode against ignition electrode |
| Ambient temperature | -30 °C to +60 °C |
| Protection rating | IP 54 or IP 65 |
| Models | |
| without electrical components | ZG4… |
| with integrated spark transformer | ZT4… |
| with integrated spark transformer and ionisation flame monitor for intermittent operation | ZA4… |
| with integrated spark transformer and ionisation flame monitor for continuous operation | ZDA4… |
| with integrated spark transformer and burner control for intermittent operation | ZR4… |
| with integrated spark transformer and burner control for continuous operation | ZD4… |
Resources
Additional information
| Kilowattage | 2 kW, 4 kW, 45 kW, 120 kW, 250 kW, 600 kW, 1000 kW, 2000 kW |
|---|
