Call us : 1.866.416.0516

Call us : 1.866.416.0516

Galvanic Applied Sciences

Galvanic2021-07-14T21:47:08+00:00

Galvanic Applied Sciences Inc. solves critical process-analysis and measurement problems for customers worldwide with our full line of rugged, fit-for-purpose gas- and liquid-measurement systems. We engineer all of our systems and components to deliver uncompromising accuracy, reliability, and long-term value to users, even in the most-challenging process environments. That’s why multinationals and small companies alike turn to us again and again – they count on our attention to detail, applications know-how, and exacting quality standards. We work with customers to tailor each system to meet their site-specific process requirements and to provide unparalleled support through installation, training, and long-term product maintenance.

Contact a Product Specialist

Galvanic Products

  • AccuChrome is designed for critical monitoring in the harshest environments. Whether you’re performing Btu and constituent analysis of natural gas for custody transfer, process optimization during natural gas fractionation, or 40 CFR 60 Subpart JA flare-gas emissions monitoring for regulatory compliance – you need precise, real-time measurements you can count on.
  • AccuLase-GPA™ is the only tunable diode laser (TDL) analyzer that measures H2S, CO2, and H2O using 1 Herriot Cell. AccuLase-GPA™ uses a proprietary measurement cell that detects H2S down to 0.15 ppm, rivaling the capabilities of lead-acetate tape technology. AccuLase-GPA™ is specific to H2S without methane, CO2, or benzene interferences. Since AccuLase-GPA™ does not require a scrubber system, the response time is rapid. AccuLase-GPA™ can measure up to 4 streams.
  • The Brimstone is a unique tail & pit gas analyzer that monitors H2S, SO2, CS2 and COS and is capable of direct coupling to the process. Direct coupling provides the Brimstone with the ability to control sulfur vapor removal more efficiently. Galvanic’s proprietary probe design eliminates plugging problems associated with heated transfer lines. In addition, the Brimstone uses Chemometrics to measure all four key components; H2S, SO2, CS2 and COS simultaneously. This is a superior method because it measures absorption at 256 points versus the standard single point analysis. As the only tail & pit gas analyzer with these combined capabilities and features, the Brimstone is a truly exceptional and innovative product that provides unique process analysis in sulfur-recovery.
  • FPA 4100 monitors specific compounds in both gas and liquid samples using either UV or visible light sources and boasts temperature controlled photo diode block for maximum signal stability. The FPA 4100 controller includes an intuitive user interface with an intrinsically safe, removable keypad, LCD screen, 10 LED indicator lights, and data-loading capability. Rugged and reliable, the systems offer multi-stream-analysis capability, delivering precise continuous measurement with no reagents or compressed gases required.
  • Monitek measures turbidity, suspended solids, and color in liquid samples and delivers those attributes at the highest performance-to-cost ratio of any in-line liquid process monitor on the market today.
  • Do you need to monitor odorant levels in hydrocarbons? That requires high-sensitivity detection and measurement of the individual sulfur components. Some natural gas pipeline custody-transfer applications also require detailed reporting of sulfur and its various components. Galvanic’s SulfurChrome online gas chromatograph makes it easy, enabling simultaneous, real-time measurement of all sulfur compounds down to the 5 ppb level.
  • AccuChrome is designed for critical monitoring in the harshest environments. Whether you’re performing Btu and constituent analysis of natural gas for custody transfer, process optimization during natural gas fractionation, or 40 CFR 60 Subpart JA flare-gas emissions monitoring for regulatory compliance – you need precise, real-time measurements you can count on.
  • AccuLase-GPA™ is the only tunable diode laser (TDL) analyzer that measures H2S, CO2, and H2O using 1 Herriot Cell. AccuLase-GPA™ uses a proprietary measurement cell that detects H2S down to 0.15 ppm, rivaling the capabilities of lead-acetate tape technology. AccuLase-GPA™ is specific to H2S without methane, CO2, or benzene interferences. Since AccuLase-GPA™ does not require a scrubber system, the response time is rapid. AccuLase-GPA™ can measure up to 4 streams.
  • The Brimstone is a unique tail & pit gas analyzer that monitors H2S, SO2, CS2 and COS and is capable of direct coupling to the process. Direct coupling provides the Brimstone with the ability to control sulfur vapor removal more efficiently. Galvanic’s proprietary probe design eliminates plugging problems associated with heated transfer lines. In addition, the Brimstone uses Chemometrics to measure all four key components; H2S, SO2, CS2 and COS simultaneously. This is a superior method because it measures absorption at 256 points versus the standard single point analysis. As the only tail & pit gas analyzer with these combined capabilities and features, the Brimstone is a truly exceptional and innovative product that provides unique process analysis in sulfur-recovery.
  • FPA 4100 monitors specific compounds in both gas and liquid samples using either UV or visible light sources and boasts temperature controlled photo diode block for maximum signal stability. The FPA 4100 controller includes an intuitive user interface with an intrinsically safe, removable keypad, LCD screen, 10 LED indicator lights, and data-loading capability. Rugged and reliable, the systems offer multi-stream-analysis capability, delivering precise continuous measurement with no reagents or compressed gases required.
  • Monitek measures turbidity, suspended solids, and color in liquid samples and delivers those attributes at the highest performance-to-cost ratio of any in-line liquid process monitor on the market today.
  • Do you need to monitor odorant levels in hydrocarbons? That requires high-sensitivity detection and measurement of the individual sulfur components. Some natural gas pipeline custody-transfer applications also require detailed reporting of sulfur and its various components. Galvanic’s SulfurChrome online gas chromatograph makes it easy, enabling simultaneous, real-time measurement of all sulfur compounds down to the 5 ppb level.
  • AccuChrome is designed for critical monitoring in the harshest environments. Whether you’re performing Btu and constituent analysis of natural gas for custody transfer, process optimization during natural gas fractionation, or 40 CFR 60 Subpart JA flare-gas emissions monitoring for regulatory compliance – you need precise, real-time measurements you can count on.
  • AccuLase-GPA™ is the only tunable diode laser (TDL) analyzer that measures H2S, CO2, and H2O using 1 Herriot Cell. AccuLase-GPA™ uses a proprietary measurement cell that detects H2S down to 0.15 ppm, rivaling the capabilities of lead-acetate tape technology. AccuLase-GPA™ is specific to H2S without methane, CO2, or benzene interferences. Since AccuLase-GPA™ does not require a scrubber system, the response time is rapid. AccuLase-GPA™ can measure up to 4 streams.
  • The Brimstone is a unique tail & pit gas analyzer that monitors H2S, SO2, CS2 and COS and is capable of direct coupling to the process. Direct coupling provides the Brimstone with the ability to control sulfur vapor removal more efficiently. Galvanic’s proprietary probe design eliminates plugging problems associated with heated transfer lines. In addition, the Brimstone uses Chemometrics to measure all four key components; H2S, SO2, CS2 and COS simultaneously. This is a superior method because it measures absorption at 256 points versus the standard single point analysis. As the only tail & pit gas analyzer with these combined capabilities and features, the Brimstone is a truly exceptional and innovative product that provides unique process analysis in sulfur-recovery.
  • FPA 4100 monitors specific compounds in both gas and liquid samples using either UV or visible light sources and boasts temperature controlled photo diode block for maximum signal stability. The FPA 4100 controller includes an intuitive user interface with an intrinsically safe, removable keypad, LCD screen, 10 LED indicator lights, and data-loading capability. Rugged and reliable, the systems offer multi-stream-analysis capability, delivering precise continuous measurement with no reagents or compressed gases required.
  • Monitek measures turbidity, suspended solids, and color in liquid samples and delivers those attributes at the highest performance-to-cost ratio of any in-line liquid process monitor on the market today.
  • Do you need to monitor odorant levels in hydrocarbons? That requires high-sensitivity detection and measurement of the individual sulfur components. Some natural gas pipeline custody-transfer applications also require detailed reporting of sulfur and its various components. Galvanic’s SulfurChrome online gas chromatograph makes it easy, enabling simultaneous, real-time measurement of all sulfur compounds down to the 5 ppb level.
Get Product Pricing
Learn More from A Product Specialist

Go to Top